chetcpasswd.cgi

Special thanks to:
Markus Jdckle <markus.jaeckle@logimatik.ch>   - German language
Domonkos Sandor <domonkos@npp.hu>             - Hungarian language
Tony Marchese <tony@ecs.net>                  - Italian language
Paul Delannoy <delannoy@univ-lemans.fr>       - French language
Jordan Kanev <dancho@globcom.net>             - Bulgarian language
Zaldy <zaldy@mail.unri.ac.id>                 - Indonesian language
Vic Hou<vic@thinking.com.tw>		      - Chinese-Big5 language
Linjingshan <linjingshan@163.net>             - Simplified Chinese language
Nenad Babajic <saca@knez.uis.kg.ac.yu>        - Serbian language
Michel van Deventer <michel@het.grote.net>    - Dutch language
Tymoteusz Rogalewski <tymek@multicon.pl>      - Polish language
Bojan Pogacar <bojan.pogacar@g-kabel.si>      - Slovenian language
Olivier Rousselot <olivier.rousselot@ssti.fr> - French language (updated)
Jon Kjaersgaard <jk@hco.kollegienet.dk>	      - Danish language
Marko Gnjidic <markog@inet.hr>		      - Croatian language
Fikret Can <fcan@hitit.bimel.com.tr>          - Turkish language
Sebastián Herrera <sebah@montevideo.com.uy>   - Spanish language
IWAIZAKO Takahiro <rabit@FreeBit.NET>	      - Japanese language
TMP <doe151@hotmail.com>		      - Finnish language


Translating:
   . Copy English.h to Your_language.h
   . Translate
   . Send Your_Language.h to orso@onda.com.br


1. run ./configure

   configure options: --enable-language=English, Bulgarian, Croatian, 
					Danish, Dutch, Finnish,
					French, German, Hungarian, 
                                        Indonesian, Italian, Japanese, Polish, 
					Portuguese, Chinese_big5,
                                        SimplifiedChinese, Serbian,
					Slovenian, Spanish, Turkish
	   			default: English

                      --enable-cgidir=where is your cgi-bin 
				default: /usr/local/etc/httpd/cgi-bin

	              --enable-virtual=where is the virtual conf file.
				A virtual host ENV is well described at this site
				http://www.spade.com/linux/howto/Virtual-Services-HOWTO-3.html
	                        added by Tony Marchese <tony@ecs.net>. Thanks.

2. make
3. make install

4. Create /etc/chetcpasswd.allow file with IP's or sub-nets allowed to use.
   Eg.: 192.168.82.10 - only this IP will use
        192.168.82.0  - IP's from 1 to 255
        192.168.0.0   - ...
        192.0.0.0     - ...
        0.0.0.0       - allow anybody. A bad choice...


REMEMBER:  chmod 700 /etc/chetcpasswd.allow
           chown root /etc/chetcpasswd.allow

           chmod 4755 /cgi-bin direcoty/chetcpasswd.cgi
           

chetcpasswd source: http://www.geocities.com/SiliconValley/Campus/5230/index.html

Any suggestions and/or comments: orso@onda.com.br